Instead of hooking in to the cars existing system you can simply mount a very nice set of lights under the rear bumper, below the existing light array, and run separate wires under the toad chassis.Note: a "toad" is a small vehicle towed behind a motorhome.
Instead of hooking in to the cars existing system you can simply mount a very nice set of lights under the rear bumper, below the existing light array, and run separate wires under the toad chassis.
This method would eliminate the neccessity of installing diodes into the toad lighting circuits to prevent feedback problems. A four pole connector at the front of the toad connects the add-on lights to the motor homes circuits.
These pictures are courtesy of Mike
Back to the Trouble Shooter
|
|
Page Five |
Page Seven |
